Rack Palette - Operators Manual - Strand Lighting

Programming and Viewing Channels
The Channel grid would look like this:
Using staggered timing, you can have all Channels in the cue finish their fades at
the same time if you typed [1] [THRU] [20] [@] [0] [-] [5] [/] [5] [-] [0] [ENTER]
which would look like this:
This would result in this Channel grid:
Note how Channel 1 does not wait at all but takes 5 seconds to fade, whereas
Channel 20 waits a full 5 seconds then snaps to its value.
Now, say you wanted to add a 1 second Wait to all of these Channel and not fuss
with the Fade times. Type [1] [THRU] [20] [@] [+] [1][/] [ENTER] which would look
like this:
Note that the syntax is [Wait] [/] [ENTER]. The [Fade] entry is intentionally left
blank. The Wait/Fade times would then appear as:
The combinations of this syntax are almost endless. One more example that shows
the power of this command line would be [1] [THRU] [20] [@] [+] [/] [-] [2] [-] [0]
[ENTER] which would look like this:
This will leave the current Wait times alone while Relatively Shifting the Fade times
down using a fanned range:
121 Palette OS Operations Manual