Rack Palette - Operators Manual - Strand Lighting

Recording and Using Looks
SMPTE Offset
If you pre-program a song using SMPTE, but later find that on-site the audio guy
has re-stripped the SMPTE on the track (as they often do), you can offset the entire
cue list using this value. For example, if you programmed your song starting at
SMPTE time 1:00:01.00 and when you hear the first beat of the track the time now
reads 2:00:01.00, you would enter a value of 1:00:00.00 in this field and then not
have to adjust any cues.
Suppress MIB (Move In Black)
If you check this option, the Cue List will not use Move In Black on new cues. You
still have the option to edit the Cue Action with the Blue Box to Use MIB. Note,
where by default this Cue Action check box says Suppress MIB, when the entire
cue list is told to Suppress MIB, the Cue Action check box is labeled Use MIB.
Override Value in Show Options
Cue Lists will inherit options set in Show Options. If you want to override specific
settings, click the check box and set its value here. For more information on each
option, see Show Options.
Palette OS Operations Manual 164