Rack Palette - Operators Manual - Strand Lighting

Console Buttons
Release Button
• Press once to Release the last altered attribute.
• Press again (or twice) to release all selected
Channels.
• Press again (third time) to release all captured
Channels.
• Press [SHIFT] + [REL] to bring back previously
released items. This also work in a three-stage
process.
NOTE:
• If a dialog box is open, the LED is flashing. Pressing
[REL] will close the dialog box without changes being
committed.
• If Channels are selected, the LED is flashing.
• If Channels have been changed but are not selected,
the LED will flash in a stepped pattern.
• If you turn on Last Action Editing in the Hardware
Setup - Console dialog box, the function of release
changes to just deselect the selected Channels.
Advancing cues will re-gain control any attributes of
unselected Channels.
71 Palette OS Operations Manual