Rack Palette - Operators Manual - Strand Lighting

Screen Layout
In this dialog box you can change the name of the page. The scroll list at the bottom
of the window tells you what Looks are recorded on this page (double clicking on
them does nothing).
The Attributes button will open the Attribute Family Masking dialog box:
By de-selecting different attribute families, these will not be recorded (by default)
when you records Looks to this page. Therefore, if you wanted a whole bunch of
Looks that only had Pan/Tilt information in them, you would de-select all but
Position. Then each time you went to record a Look on this page, the Record dialog
box would already be masking out (not recording) any attributes except Position
attributes. This can be overridden in the Record dialog box at will.
Note:
o
o
If you double tap [S5] (or any other softkey), it will 'solo'
Position. That is, all other check marks will clear and Position
will remain checked.
While in the main Properties dialog box, if you press
[SHIFT], the Attribute button will look like
this
following:
and the softkeys will change to the
Pressing any of these changes the attribute masking without the need
to open the Attribute dialog box. You can also press [SHIFT] and double
tap any attribute family to solo it.
Palette OS Operations Manual 58