Rack Palette - Operators Manual - Strand Lighting

Programming and Viewing Channels
Select the desired palette and select OK to select Channels using that palette Live.
[S7] - Reserved
[S8] - The [Store] and Recall selection set is a useful places to temporally stuff a
group of Channels that you're currently working with. If you know you will be coming
back, time and time again, to a selection of Channels, press [SELECT] [SHIFT]
[STORE]. Then when you want to get them back, press [SELECT] [RECALL].
[S9] - Typing a selection in the Command Line and pressing Odds will only select
the odd numbered Channels. For example, if you type [1] [THRU] [10] [SELECT]
[ODD] you will end up with 1 + 3 + 5 + 7 + 9 selected. If no Channels are selected
and you select Odd, all the odd Captured Channels will be selected. (If nothing is
captured or selected, pressing Select Odd will do nothing.)
[S10] - Even works exactly like Odd does.
[S11] - If you have a number of Channels Captured and some of them are Selected,
choosing Invert will make the non-selected Captured Channel selected.
[S12] - While you are working on an idea, you may be juggling a number of different
Channels or Channel groups. The Select Previous button allows you to quickly grab
the Channels you were working with just before the ones you are working with now.
Making adjustments, then pressing this button, then making adjustments and
repeating will switch you between the last two selection sets ad infinitum. Alternately,
you can press and hold [S12] to get a pop up list of the last ten selections:
When you get this list, [S1] through [S10] become the different selections. You
can also use the mouse, the arrow keys or the wheel to select the desired
Channels in the list. Once you have highlighted the right line, press [ENTER].
129 Palette OS Operations Manual