Rack Palette - Operators Manual - Strand Lighting

Cue Lists
Playback Loops
Links and Follows can be combined to create playback loops. If you are running a
Cue List and press [GO] you can jump out of the loop and go to the next cue. Other
actions can happen if you press [GO] too. Check out the topic called Action on GO
within Cue Loop.
Creating a Loop Within a Cue List
To create a loop, you need to link the last cue of the loop to a cue higher in the list
and make all cues Follow on from each other. The easiest way to do this is use the
Blue Box to highlight the Action cells of the cues in the loop.
1. Move the Blue Box to the cue with the lowest number
2. Hold down [SHIFT] and press the [DOWN ARROW] until you reach the last cue in
the loop:
3. Then press [EDIT] to open the Cue Action dialog box:
4. Select the Follow Mode and uncheck [S3] Run Next Cue.
5. Roll the wheel or type in the Next Cue number. The cue label will appear to the right
as you roll the wheel.
6. Select OK. The cue list will now looks something like this:
195 Palette OS Operations Manual