Rack Palette - Operators Manual - Strand Lighting

Concepts and Overview
1. Access the Independent Timing display by pressing [SHIFT][EDIT].
Alternately, you can use the mouse to press the Times button:
The Channel Grid and Attribute Grid look very similar, except that the
numbers that appear are in seconds rather than degrees or hertz or
RPMs:
2. To achieve the offset intensity times as shown above, type in the
command line [1] [THRU] [20] [@] [0] [-] [5] [ENTER]. It will
appear like this:
3. To set the Pan timing to 3 seconds, type [1] [THRU] [20] [S2-Pan]
[3] [ENTER] which would appear as:
Note:
All the moving light softkeys will stuff text onto the command line. That
is, if you press [S5-Position], the text Position Time will appear,
which will set both the Pan and Tilt times. If the individual attributes
are currently not visible on [S1] through [S4], just continue pressing
[S5] through [S9] until you see the attributes you want control over.
4. When you have finished setting attributes and times, record the new
cue or update an existing cue. Be sure to include the [S11] Time
filter in the Attributes masking:
Palette OS Operations Manual 14