Rack Palette - Operators Manual - Strand Lighting

Recording and Using Looks
Linking Cues
In some situations you may want to link one cue to another in the same cue list,
effectively jumping over some cues. You do this by editing the Action of a cue.
1. Using the arrow keys, move the Blue Box to the Action column of the
last cue before the jump.
2. Press [EDIT] or [INSERT] to change the cue's action.
3. The Cue Action dialog box will appear.
Note:
4. Press [S3] to disable the Run next Cue option. The focus will move
to the edit box below.
5. Type in or use the wheel to select the Next Cue. The cue labels will
appear to the right of this edit box.
6. Press [ENTER] to close the dialog box.
7. The cue list will now show the Link icon with the cue to which the
next [GO] will link to:
You can also use the [VIEW][CUE][##][ENTER] syntax to get the Cue List
Properties dialog box.
Using the Command Line to Links Cues
If you start a command line with [CUE] the softkeys change to Cue specific
functions:
Typing [CUE][5] [S3 - LINK TO] [10] [ENTER] allow you link Cue 5 to Cue 10. If
the cue already has a Link, typing [CUE][5] [S3 - LINK TO] [ENTER] will delete the
link. If you omit the Cue Number, the current cue number will be used.
Palette OS Operations Manual 194