Rack Palette - Operators Manual - Strand Lighting

Programming and Viewing Channels
Controlling Moving Lights
All Channels in Palette have the possibility of having more than one attribute.
Conventional dimmer Channels only have one attribute which is their level (0-100%).
You can see these levels in the Channel Grid:
Channels that have additional attributes can be identified in the Channel Grid by the
red triangle next to the Channel number. These triangles will appear after you patch
Channels other than those of type Dimmer. The additional attributes of the Channel
are shown in the Attribute Grid:
The Intensity value is repeated in this grid for convenience. As you select different
attributes to control, the columns will autoscroll to show your their values, but the
Channel column and the Intensity column remain on the left hand side.
Note:
The Display Menu allows you to park an attribute grid on a second monitor. If
you are displaying both the Attribute Grid below the Channel Grid as well as
the Second Attribute Grid, only the one on the main screen will autoscroll.
Attribute Control
To take control of a moving light, select it and set its intensity level using any of the
methods described in the topic Selecting and Setting Channels. The softkeys will
then change to look like this:
After selecting the desired Channels, softkeys [S5] through [S9] allow you to
change the function of [S1] through [S4]. For example, pressing [S5] will change
[S2] and [S3] to Pan and Tilt:
Palette OS Operations Manual 112