Rack Palette - Operators Manual - Strand Lighting

Recording and Editing Cues
Recording a Cue
Fast Description
Note:
1. Select Channels and set levels.
2. Press [REC] [ENTER] or [REC] [SELECT] on the Playback you want to use.
3. A cue with the next available number will be appended to the cue list. This cue will
use the default timing as determined in Default Cue List Options
o
o
If you want to keep the Record Cue dialog box open to add label or
change the record options, hold down [SHIFT] before pressing
[SELECT]. (i.e., [REC] [SHIFT]+[SELECT])
If the Blue Box is resting on the last cue of the cue list, the Record
dialog box will be automatically stuffed with a sensible new cue
number.)
Detailed Description
1. Set the levels you want to record in a cue. The levels can be set by any method
(using the mouse, the keypad, Looks, Groups, etc.)
2. Press [REC] or [R] or click the Record button on the Tool Bar.
3. The Record dialog box appears:
3. Enter a cue Number. (The number in the [S2] box should be the
next available cue at the end of your cue list or it will be cue number
highlighted by the Blue Box.) The Cue Number box is active by
default, so you can just enter a number and press [ENTER]. (Also
see note below about recording ranges of cues.)
The following properties are optional:
[S1] - If needed, select the Cue List to record to. The default is the
cue list you currently have selected.
[S3] - Change the Record option if needed. The default option is to
record your Changed Attributes or those marked by the delta
131 Palette OS Operations Manual