Rack Palette - Operators Manual - Strand Lighting

Tools
RemDim or Remainder Dim
Access the RemDim tool by pressing and holding the [TOOLS] button (or [T] on
the QWERTY keyboard) then select [S10] (you may need to select if
RemDim is not visible):
If RemDim was your last Tool, then just pressing and releasing [TOOLS] will
perform a RemDim.
If Channel 1 is at 0%, typing [1] [REMDIM] will take Channel 1 to 100% (or the Full
level as set in Show Options) and all other Channels above 0% in the current cue
list to 0%. The second press of [REMDIM] will take all Channels, regardless of
playback, to 0%.
If Channel 1 is at some level set by the current cue list, typing [1] [REMDIM] will set
all other Channels above 0% in the current cue list to 0% and leave Channel 1 at its
current level.
The syntax [1] [@] [5] [REMDIM] takes Channel 1 to 50% and others in the current
cue list above 0% to 0%. Again, the second press of [REMDIM] will take all
Channels to 0%.
Typing [REMDIM] by itself takes all Channels in the current cue list above 0% to 0%.
225 Palette OS Operations Manual