Rack Palette - Operators Manual - Strand Lighting

General Information
General Show Options
Touching [S3] will open the Show Options dialog box. [S9] though [S12] switch you
between the different setup options.
[S1] - Edits Track Forward Record Default
When you are recording cues in the middle of your cue list (not appending to the
end of the cue list), the Record dialog box will have a check box to determine if the
changes you make will track forward into the next cue or be undone for you
automatically in the next cue. This option allows you turn it on or off by default.
[S2] - Up / Down Percent
The Console's [UP] and [DOWN] buttons or the QWERTY keyboard's [PG/UP] and
[PG/DN] buttons will move Selected Channels' intensities by this amount. If you
hold down [SHIFT] while using those buttons, the level will change by 1%
regardless.
[S3] - At Full Percent
When using the Command Line, you can press [FULL] or [HOME] to take the
selected Channels to a predetermined level. On new show, this is 100%, but you
can change it here to any value. If you double hit [FULL] or [HOME] the Channel
will go to 100% regardless of this setting.
231 Palette OS Operations Manual