Rack Palette - Operators Manual - Strand Lighting

Console Buttons
Plus, Minus, At, Full, Out buttons
• [FULL] and [OUT] will set the level of selected
Channels without having to press [ENTER]
(The default Full value is set in Show
Options)
• When editing with the Blue Box split up/down
times , use [FULL] to highlight the
Wait time (start of line) and [OUT] to edit the
Fade time (end of line).
• Use [FULL] and [OUT] in dialog box edit
boxes or combo boxes to take the value to its
upper or lower limit
• Use the [/] key to select a range of Channels
or to specify WAIT/FADE times in any time
field.
• Use the [-] key to remove Channels from a
range or to put the word TO on the command
line for specifying ranges of levels or times
across a series of Channels.
• Use the [BACKSPACE] key to clear the
command line and deselect the selected
Channels to reveal the default Soft Keys
Palette OS Operations Manual 70