Rack Palette - Operators Manual - Strand Lighting

Cue Lists
5. Press [EDIT] on the console or [INSERT] on the QWERTY keyboard and follow
Steps 3-4 above.
Changing Multiple Cells' Values Relative to Each Other.
1. Move the Blue Box to the first cell you want to change using the arrow keys.
2. Hold down [SHIFT]
3. Continue to press the [DOWN ARROW] or [UP ARROW] to increase the size of the
Blue Box to highlight all wanted cells.
4. Let go of [SHIFT]
5. Press [EDIT] on the console or [INSERT] on the QWERTY keyboard.
6. An edit box will open on the last cell you selected. Roll the [WHEEL] to change its
value up or down.
7. Press [ENTER] to close the edit box. Note how all values changed up or down
relative to the amount of the change you made to the open cell.
Tip:
Holding down [SHIFT] while rolling the [WHEEL] changes numeric values
by 0.1. It will change SMPTE times by 1 frame.
Changing a Cue's Action
1. Move the Blue Box to the Action column of the cue that you want to add a link,
follow or macro. You may also want to adjust the Move In Black parameters.
2. Press [EDIT] on the console or [INSERT] on the QWERTY keyboard.
3. The Cue Action dialog box will open (see Cue Properties):
169 Palette OS Operations Manual