Rack Palette - Operators Manual - Strand Lighting

Cue Lists
Action on GO Within Cue Loop
When the GO button is pressed while a loop of Cues is going, the Cue List can be
configured to behave differently. A loop is defined as a series of Cues that all have
Follow times and a Link back from the last Cue in the Loop to the first Cue in the
Loop. See Playback Loops.
1. View the properties of the Cue List by pressing [VIEW] [SELECT] OR
right click on a Cue List in the Cue List directory and select Properties.
The Cue List Properties dialog box will appear.
2. To Override the value defined in Show Options, check the box to the
left of Go Action Inside Loops.
3. Select from the list to the right:
• Next cue
Go to the next Cue within the Loop. This is what the Go button does normally in
a cue list if you press Go when a fade is executing.
• Fall out of loop
Execute all remaining cues within the loop in their cue time, then execute the
cue after the loop.
• Jump out of loop
197 Palette OS Operations Manual