Rack Palette - Operators Manual - Strand Lighting

Console Buttons
Shift Button
• Use with [REL] to restore previously released
Channels. (NOTE: if Last Action Editing is on, [SHIFT]
+ [REL] will fully release any captured attributes.
• Use with [REL PB] to release all cue lists.
• Use with [EDIT] to enter the Times Display.
• Use with [STEP UP/DN] buttons to go to the top or
bottom of a cue list.
• Use with [ARROW KEYS] to select a range of cells
with the Blue Box.
• Use with [GOTO CUE] to open the Goto Cue dialog.
• Use with [GO] to assert the appropriate cue list.
• Use with [BACK] to go to the previous cue in cue time.
• Use with [UP/DOWN] to adjust the selected Channels
level by one percent.
• Use with Split Crossfaders or Single Crossfaders (A/B
C/D fader setup under [S3] Hardware Setup) to
manually move backwards through a cue list.
• When the command line is empty, holding down
[SHIFT] and rolling the wheel will scroll the Channel
grid.
• Use after pressing [REC] and before pressing [BUMP]
or [SELECT] or [5X5] to keep Record dialog box open
for labeling or attribute masking.
• Use with [THRU] for [Thru-On] syntax
• When moving lights are selected, hold down [SHIFT]
while double pressing [S1] through [S4] to add an
Effect to the corresponding attribute
Palette OS Operations Manual 80