Rack Palette - Operators Manual - Strand Lighting

Screen Layout
Remote Video
If you install the Palette PC software on your personal computer (available
from www.strandlighting.com), one of the START Menu options is to connect (using
the Local Area Network) to a console to monitor your show. Once you launch the
application using this shortcut, you will be presented with the Remote Video
Connection dialog box:
A list of recent IP addresses can be found by clicking on the down arrow in the
combo box. If you don't the know the IP address of your console, hover over the
Network button in the Palette Control Panel. The tooltip will show you the
current IP address. By default, your Palette allows five remote connections.
The remote video connection does not allow you to Select or alter Channels or
change Cue Properties, but it does allow you to independently view cues in Blind
just by moving the Blue Box and you can display any cue list you wish to see which
cues are active. The remote can chose to display Sub Masters, Macro Buttons,
Tracksheets and position the splitters in any locations they want. Most toolbars and
Softkeys are disabled:
63 Palette OS Operations Manual