Rack Palette - Operators Manual - Strand Lighting

General Information
Pathport
Palette can talk directly to any number of Pathport Output Nodes installed in your
venue using your LAN via the Ethernet port on the back of the processor. These
units are available throughout the industry by dealers selling Pathway products. For
more information on Pathport visit Pathway Connectivity at
www.pathwayconnect.com.
To change the Pathport settings, enter the Patch by pressing [S1] when there are
no Channels selected.
Note:
The softkeys are sensitive to your current Channel selection (i.e., if you have
moving lights selected, [S1] will not be Patch). To enter the patch,
regardless of what the softkeys are displaying use the mouse to select the
Setup icon above the Cue List Directory. You can also press [BKSP] to
deselect your Channels without Releasing them.
On new shows, the DMX outputs on the back of your console hardware are mapped
to Palette Outputs 1 through 1024. You can configure the Output Devices by
clicking the [+] sign in the upper left hand pane of the display:
Click on the cell to the right of Pathport to open the output configuration combo:
255 Palette OS Operations Manual