Rack Palette - Operators Manual - Strand Lighting

Screen Layout
Toolbars
Palette has three different toolbars. If you are not sure about any tool’s function,
position the mouse pointer on a toolbar button (without clicking). The tool is
highlighted, and the Tool Tip display indicates the function:
The functions of the Toolbars are detailed below. Most of these functions have
QWERTY keyboard equivalents.
Cue List Toolbar
The Cue List Toolbar is located directly above the Cue List on the left side of the
display.
The Autoscroll button turns the Autoscroll Cue List function on and off . [S11]
also toggles the pin.
The GO button (Console Equivalent: [GO], QWERTY Equivalent: [SPACE]):
• activates the cue indicated by the Cue List Pointer in the cue's
recorded time
• advances to the next cue in the recorded time (activating any Cue
Actions and executing any Follow Cues)
The HALT button stops any cue that are playing back on this cue list from running. Once
the cue list has been stopped, hitting the Halt button again will backup to the previous
cue in the default Cue List Back fade time (See [S2] Show Options). (Console
Equivalent: [HALT/BACK] QWERTY Equivalent: [Z])
The Go Back button is equivalent to doing a Goto on the previous cue in its own cue
time. (Console Equivalent: [SHIFT] [HALT/BACK] QWERTY Equivalent: [SHIFT] [Z])
The Step Back button replays the cue before the active cue in the default Step Time
(See [S2] Show Options). (Console Equivalent: [STEP UP] QWERTY Equivalent: "[")
Use with [SHIFT] to go to the top of a cue list.
The Step Forward button goes to the cue after the active cue on the default Step Time
(See [S2] Show Options). (Console Equivalent: [STEP DN], QWERTY Equivalent:
"]") Use with [SHIFT] to go to the bottom of a cue list. If a long fading cue is running,
pressing this button will complete the cue in Step Time.
The Release Cue List button halts all cues on that Cue List and releases all Channels
controlled by that Cue List. (The Channels will either return to their default levels, or
to the levels set by any other Cue List or Sub Master that has control of them. They
will fade out using the Cue List's release time). (Console Equivalent: [REL-PB]
QWERTY Equivalent: [\]) Use with [SHIFT] to release all cue lists.
Palette OS Operations Manual 30