5. Commands and Functions - Sanyo Denki America, Inc.

6. Communication specifications
6.4 Standard Response Time Values
[T1]=500μsec×2 n (n=0 to 7) setting is possible (command code 10h).
Based on the T1 setting, [T2]=[T1] x2, [T3]=[T1] x4 will be set.
Standard values for [T1] to [T3] are shown in the table below.
Standard response time values Unit (ms)
Response Time
Response Time
T1 T2 T3
Setting Value n
Setting Value n
T1 T2 T3
0 0.5 1 2 4 8 16 32
1 1 2 4 5 16 32 64
2 2 4 8 6 32 64 128
3 4 8 16 7 64 128 256
6-7