Toshiba iES32 Installation Manual.pdf

Advanced Integrations and Applications
SMDI
Step 1: Enable SMDI
Important! When configuring SMDI ports, you must enter the data in the following order:
Telephone System Integration, Answer Methods, and Voice Ports.
1. Select Telephone System Integration from the Configuration menu. The Telephone System
Integration screen displays.
2. From the Telephone System Integration screen, click Add Group and type a new Integration
Group Name. Define the group’s Switch Type and select SMDI from the drop-down menu in
the Integration Type field. Designate the serial port from the drop-down SMDI Serial Port field
and the maximum extension length using the spin button provided. (See “Telephone System
Integration” on page 5-4 for detailed instructions on using the screen.)
3. Define the Answer Method used for the link by clicking on Add on the Answer Methods
screen. Type a new name for the Answer Method and click OK. Select the new Integration
Group Name you added in Substep 2 above from the drop-down list in the Telephone System
Integration Name field. You can use 990 for the Greeting User Agent. (See “Answer Methods”
on page 5-9 for detailed instructions on using the screen.)
4. From the Voice Ports screen, type the extension numbers, if connected to the Strata DK, or the
terminal numbers of the Centrex lines. Designate the appropriate Answer Method for SMDI
using the drop-down menu in the Answer Method field. This information must be exact. The
Stratagy ES compares the extension number in this field to the incoming Terminal number in
the SMDI packet to determine the port the call will ring on.
5. From the Serial Ports screen, select SMDI Port from the Assigned As field for the COM port
designated on the Telephone System Integration screen. Select the group name entered in the
Telephone System Integration screen from the Telephone System or Resource Name drop-down
list. Set the Serial Port Default Settings. Strata DK settings are: 7, even, 1 stop bit. (See “Serial
Ports” on page 5-13 for detailed instructions on using the screen.)
6. Define the Auto Attendant for each mailbox using the Mailbox Editor’s Auto Attendant
Options screen. From the drop-down menu in the Call processing, Telephone system field,
select the SMDI group you added in Substep 2 above. (See “Auto Attendant Options” on page
6-18 for detailed instructions.)
Notes
• The Telephone System field in the Auto Attendant screen dictates the mechanism that will
be implemented for Notification Titles MsgLampOn and MsgLampOff. If the telephone
system uses SMDI integration, then the Message Waiting LEDs will be managed by serial
port commands.
• Remember to restart the Stratagy ES service after making changes to the system
configuration.
Step 2: Connect SMDI
SMDI connections use a RS-232 cable to connect the telephone system to one of Stratagy ES’s
serial ports.
For a Centrex installation, a data modem provides the SMDI connection. SMDI interface requires
that the Strata DK have a WSIU, TSIU, PIOU, PIOUS, RSSU or RSIU PCB installed.
Consult the Strata DK Installation and Maintenance Manual for installation instructions.
12-2 Stratagy ES I&M 06/02