28.06.2015 Views

Toshiba iES32 Installation Manual.pdf

Toshiba iES32 Installation Manual.pdf

Toshiba iES32 Installation Manual.pdf

SHOW MORE
SHOW LESS

Create successful ePaper yourself

Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.

Overview<br />

Stratagy <strong>iES32</strong> Hardware<br />

Voice Port Status Lights<br />

The four LEDs labelled Port Status on the front of the <strong>iES32</strong> unit indicate the hookswitch and ring<br />

states of the ports in the group (1~8, 9~16, 17~24, and 25~32). The lights are On/Off based on the<br />

following:<br />

Off<br />

Green<br />

Port LEDs<br />

All ports in that group are on-hook and idle.<br />

One or more ports in that group are off-hook and in<br />

use.<br />

Overview<br />

Status Light<br />

The status light indicates the state of the <strong>iES32</strong>:<br />

Status LEDS<br />

LED Color State<br />

Power Off No power<br />

Green<br />

System is operational.<br />

Shutdown Green Shutdown is safe. Power switch can be turned<br />

off.<br />

Yellow<br />

Shutdown is not safe. Indication that shutdown<br />

did not occur properly displays in 90 seconds<br />

and <strong>iES32</strong> reboots.<br />

Network Amber/Off 10BaseT connection<br />

Amber/Green<br />

100BaseT connection<br />

Buttons<br />

There are two buttons on the control panel—Shutdown and Power. To avoid accidental disruption<br />

of the system, both buttons are recessed into the <strong>iES32</strong> faceplate and must be depressed for<br />

three~five seconds to perform their respective functions. Use a ball point pen or similar instrument<br />

to access these buttons.<br />

CAUTION!<br />

Do not use any instrument that is conductive or magnetic (e.g., a magnetic<br />

screwdriver).<br />

• Shutdown Button – Eliminates the need for a connecting cable between the <strong>iES32</strong> and the<br />

Stratagy Administration PC (or calling into the Administrator’s mailbox to stop the Stratagy<br />

application). Control Panel LED indicates the status of the shutdown.<br />

• Power Button – Powers off the <strong>iES32</strong>. Power can be turned off independent of the Strata CTX,<br />

after shutdown. This enables you to remove the <strong>iES32</strong> without interrupting the telephone<br />

service.<br />

Thermal Sensing<br />

The <strong>iES32</strong> is equipped with a device that senses the ambient and CPU temperatures. The device<br />

checks the temperatures every five minutes and initiates either a Warning notification or proceeds<br />

to shut down the system (software) if the temperature exceeds the defined threshold.<br />

See “Thermal Sensing” on page 3-11 for details.<br />

Stratagy ES I&M 06/02 1-15

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!