Toshiba iES32 Installation Manual.pdf

Stratagy ES Configuration Menu
Telephone System Integration
4. Select the Switch Type from the drop-down menu.
Note If you select , the Create/Save/Delete Switch Type
screen displays and you need to type the name for the new switch type and click OK. The
new switch type is saved with the settings that appear on the screen at the time it is saved.
The name is added to the drop-down menu for the Switch Type field.
5. Select DTMF or SMDI from the Integration Type drop-down menu.
Note If you select SMDI, two fields appear on the screen to the right—SMDI Serial Port and
Max. Ext. Length. Select the SMDI Serial Port from the drop-down menu. Double-click
the Max. Ext. Length field and using the spin-button, select a number from 1~10.
6. (Optional) Select T1 in the Digital Line Protocol field if you have a T1 card installed in the
system.
Note If you select T1, two fields appear on the screen to the right—Transfer Support and T1
Protocol Type. Select TRUE from the drop-down menu if the T1 board is going to perform
transfers; otherwise leave this field at FALSE. Skip the T1 Protocol Type field since the
default is the only option available.
7. Modify Dial Codes and Integration Patterns, as required. To change the sequence of integration
patterns, highlight the line and use the Move arrows to the right of the screen.
Note These fields support only the Analog Integrations.
8. Click OK
...or Apply.
Clicking OK saves the changes and closes the screen, whereas clicking Apply saves the
changes but does not close the screen. A dialog box displays.
9. Click Yes. The changes are added to the Stratagy ES database the next time Stratagy ES is shut
down and restarted.
Delete Integration Group
1. From the toolbar, click the Telephone System Integration icon
...or from the Stratagy Administration Main menu, click Configuration > Telephone System
Integration. The Configuration Properties screen with the Telephone System Integration Tab
displays (see Figure 5-1).
2. From the drop-down menu, select the Integration Group Name you want to delete.
3. Click Delete Group. A dialog box asks you to confirm the deletion.
Important!
When you delete a group, references to it in the Answer Methods screen are
removed. References in User Agent or COS must be removed manually by you. If you
don’t remove them, Auto Attendant (AA) and notification does not work properly.
Stratagy ES
Configuration Menu
4. Click Yes. The Telephone System Integration screen displays without the deleted group in the
windows.
Stratagy ES I&M 06/02 5-7