Toshiba iES32 Installation Manual.pdf

Stratagy iES32 Installation
Step 12: Program Applications
➤ To program the iES32 for Night Transfer Alternate Routing
1. Define the User Agent Mailbox 990 in the Mailbox Editor to contain:
User Agent Mailbox 990
User Mode Options screen
Extension
Store Messages
Do not Disturb
@KT(921)G(920)
not checked
Auto Attendant Options screen
not checked
2. Access the User Agent 990 mailbox via telephone and record greeting 1.
When the NT mode of the Strata CTX switch is enabled, calls for the specific port are routed to
User ID 921. When the NT mode of the Strata CTX switch is disabled, calls route to User ID 920.
Thermal Sensing
The iES32 is equipped with a device that senses the ambient and CPU temperatures. The device
checks the temperatures every five minutes and initiates either a Warning notification or proceeds
to shut down the system (software).
The following are the thresholds:
• Notification: CPU 80 degrees C, ambient 65.
• Shutdown: CPU 90 degrees C, ambient 75.
The temperatures must be recorded at these thresholds for three consecutive checks before
notification or shutdown occurs. Current temperatures can be checked through Trace or NT Event
Viewer.
Note Event viewer only shows temperature at time of system start up or if there is a reading
outside of the specified range.
Stratagy iES32
Installation
CAUTION!
Adjustment to any of these parameters could cause the iES32 to not shut down
at the appropriate temperature and could cause permanent damage to the
system.
Parameter
sys_temp_amb_shutdown_threshold
sys_temp_amb_warning_threshold
sys_temp_check_interval
sys_temp_cpu_shutdown_threshold
sys_temp_cpu_warning_threshold
Description
Sets ambient temperature shutdown threshold.
Default: 75
Sets ambient temperature warning threshold.
Default: 65
Sets temperature checking time interval in seconds.
Default: 300
Sets CPU temperature shutdown threshold.
Default: 90
Sets CPU temperature warning threshold.
Default: 80
Stratagy ES I&M 06/02 3-11