Toshiba iES32 Installation Manual.pdf

Stratagy ES Configuration Menu
Serial Ports
Table 5-4
FIELD
Port Name
Serial Ports Tab Screen Fields
DESCRIPTION
(Display only) Default is COM1.
Assigned As
Possible values are:
Available – Not in use by Stratagy ES Administration.
SMDI – Defined in the Telephone System Integration screen.
Resource – Reserved under Resource Manager.
Note You cannot type entries into this field. Selection must be made from the
drop-down menu.
Telephone System or
Resource Name
Possible values are:
Blank – When Assigned As field reads Available, this field is blank.
Telephone System – If reserved as a SMDI in the Assigned As field, you must enter
a Telephone System name.
Resource Name – If reserved as a Resource in the Assigned As field, you must
enter a Resource Name.
Notes
• A drop-down menu is provided for this field.
• More than one port can be configured to the same Resource Name.
Serial Port Default Settings
Settings are for the port highlighted.
Baud Rate Default is blank. Possible values are: 110, 300, 600, 1200, 2400, 4800, 9600,
14400, 19200, 38400, 56000, 57600, 115200, 128000, 256000.
Data Bits Default is blank. Possible values are: 7, 8.
Parity Bits
Default is blank. Possible values are: no, odd, even, mark, space.
Stop Bits Default is blank. Possible values are 1, 1.5, 2.
Target Phone Number
Modem phone number used when the application does not define its own dialed
number when making a call.
See screen for examples.
5-14 Stratagy ES I&M 06/02