Toshiba iES32 Installation Manual.pdf

Stratagy ES4, ES80, ES96, ES96R Installation
Step 2: Install Voice and Resource Board(s)
6. Remove the Stratagy ES’s cover.
ES4: Facing the back panel of the
server, unlock the latch (see Figure
2-8 on page 2-9), push up on the cover
latch (blue) located in the middle back
and pull the cover towards you and
away from the unit.
ES80: Facing the back panel of the
server, unscrew the six screws on the
back. Slide the cover back and lift the
cover away from the unit.
ES96: Facing the back panel of the
server, unscrew the three screws on
the right side (see Figure 2-2). Using
the cover handle, slide the cover to the
left about 1/2 inch and lift the cover
away from the unit.
ES96R (rack-mountable chassis):
Facing the back panel of the server,
unscrew the two screws on the back.
Slide the cover back and lift the cover
away from the unit.
3936
Cover Handle
Stratagy ES4, ES80,
ES96, ES96R
Figure 2-2
ES96 Cover Removal
Step 2: Install Voice and Resource Board(s)
CAUTION!
Due to conflicts with the IRQ settings, the ProLine/2V and Dialog/4 voice
boards should not be included in the same Stratagy ES system with the SCSA
compatible voice boards (i.e., D/160SC-LS, D/41ESC).
The following voice and resource boards are available for installation in the Stratagy ES:
• ProLine/2V
• Dialog/4
• D/160SC-LS
• D/41ESC
• GammaLink Fax
• Antares
• D/240SC-T1
• D/240PCI-T1
• D/480SC-2T1
Stratagy ES I&M 06/02 2-5