2 - TCA spa

CONTENTSSECTION 6 - MOTION CONTROL VALVESThis section contains a most extensive range of overcentre and motion control cartridges, includingnormal, part vented and fully vented versions. Suitable for load holding, load safety and to preventload runaway, giving low pressure drops, various pilot ratios and excellent stability to all types ofmoving loads.SELECTIONSECTION SERIES APPLICATION RANGE PAGE61CE/1CEEOvercentre cartridgepilot assisted reliefwith check1CEROvercentrecartridge as 1CEseries with reliefbalanced1CEB/1CEBDOvercentrecartridge as 1CEseries with reliefand pilot balancedTo control moving loads and preventload runaway, giving load holdingand hose failure safetyAs 1CE series but with reliefbalanced against back pressureallowing the valve to be used withclosed centre DCV with service linereliefsAs 1CE series but balanced on reliefand pilot areas. For use onproportional systems or applicationswith widely varying back pressures350 bar(5000 psi)300 litres/min(80 US GPM)350 bar(5000 psi)300 litres/min(80 US GPM)6-1116-1516-1816-2056-2416-1216-1616-211350 bar(5000 psi)300 litres/min(80 US GPM)6-1316-1716-1736-1916-1936-2516-2551CELOvercentre cartridgewith constantcounterbalancepressureThis valve is used in systems wherethe machine framework introducesinstability, such as telescopichandlers, cranes and concretepumpsFor use on boom lock applicationsgiving load-holding and hose failuresafety. With or without internal relief380 bar(5510 psi)140 litres/min(37 US GPM)6-1356-1756-2251CPB/1CPBDPilot controlledcartridges withoutrelief function,unaffected by backpressure400 bar(5800 psi)300 litres/min(80 US GPM)6-1376-1396-1776-1976-2651CEECLine mountedovercentre withmake up checks.Piece parts in bodystyleMotion control valves with make upchecks and cross line relief functionfor use on transmission systems orsingle rod cylinders when dual reliefis required350 bar(5000 psi)300 litres/min(80 US GPM)6-3016-3111CEESH/1CEECSHAs 1CEEC serieswith brake shuttle.Piece parts in bodystyleAs 1CEEC series but with addedbrake shuttle for removal of springapplied park brakes350 bar(5000 psi)300 litres/min(80 US GPM)6-2716-2816-3216-341Integrated Hydraulics LtdIntegrated Hydraulics IncCollins Road, Heathcote Ind. Est., Warwick, CV34 6TF, UK.7047 Spinach Drive, Mentor, Ohio 44060, USATel: +44 (0) 1926 881171 Fax: +44 (0) 1926 315729 Tel: (440) 974 3171 Fax: (440) 974 3170Website: www.integratedhydraulics.comWebsite: www.integratedhydraulics.com6-101.D