2 - TCA spa

PRESSURE DROPFLOW-US GPM0 2.5 5 7.51012.5CARTRIDGE ONLYBASIC CODE:1CEL30HEX SOCKETADJUST4.0 A/F5075017.0 A/F4060057.4PRESSURE-BAR302010FREE FLOW450300150PRESSURE-PSI42.425.4 A/FPILOT (3)VALVE (2)0PILOT OPEN10 20 30 40 50FLOW-LITRES/MIN0CYL (1)Tightening torque of “F” adjusterlocknut - 20 to 25 NmSINGLE VALVE3/8” 1/2” PORTSDUAL VALVE3/8” 1/2” PORTSBASIC CODE:Body ONLY part numbersBSP, aluminium3/8” B67431CEL35SAE, aluminium3/8” B105361/2” B7884BSP, steel3/8” B12823SAE, steel1/2” B11811BASIC CODE: 1CEEL34(INTERNALLY CROSS PILOTED)Body ONLY part numbersBSP, aluminium3/8” B6836SAE, aluminium3/8” B108051/2” B30237BSP, steel3/8” B13803SAE, steel1/2” B118126C1C231.770.02 HOLESØ9.0 THRO'60.026.542.0 9.023111.5117.4V1V263.526.557.0V1C1V2C2123.431.816.09.032.063.515.731.89.882.0101.62 HOLES Ø9.0 THRO'This valve has been designed to eliminate instability from flexible boom applications or where the load inducedpressure varies greatly. To get the best results, the settings should be adjusted for each application and thenfactory set for production quantities. Please contact Integrated Hydraulics for more information.Basic Code1CEL30 = Cartridge Only1CEL35 = Cartridge and Body1CEEL34 = Cartridges and DualAdjustment MeansF = Screw AdjustmentPort sizes - Bodied Valves Only3W = 3/8” BSP Valve & Cyl Port. 1/4” BSP Pilot Port6T = 3/8” SAE Valve & Cyl Port. 1/4 SAE Pilot Port8T = 1/2” SAE Valve & Cyl Port. 1/4 SAE Pilot PortWhere measurements are critical request certified drawingsORDERING CODE EXAMPLE1CEL*** F 3W 30 S 230 50We reserve the right to change specifications without notice6-136.DCounterbalance setting bar(10 bar increments).High pressure setting bar(10 bar increments).SealsS= Nitrile (For use with mostindustrial hydraulic oils)SV = Viton (For high temperature andmost special fluid applicationsPressure Range, bar @ 4.8 l/min20 = 170-300. Std setting 220 (170/50)30 = 240-370. Std setting 280 (230/50)40 = 270-380. Std setting 350 (300/50)Std setting made at 4.8 litres/min