2 - TCA spa

MOTOR MOUNTED VALVEOMP MOUNTING PATTERNCROSS LINE RELIEF VALVE1CLLROMP150M1AM2BAPPLICATIONTo protect both lines in a circuit from over pressurisationby relieving oil to the other line. Ideal for use with motorsor directional valves as a safety relief. Differential area,fast acting, poppet valve.OPERATIONPressure acts over one of two differential areas forcingthe poppet back allowing relief flow to the other port.This being a single cartridge is ideal for mounting on tothe motor in a special housing.PRESSURE DROPFEATURESSingle cartridge relieving in both directions cutting downspace requirements, giving full adjustment through itsrange on both pressures at the same time.SPECIFICATIONSFigures based on: Oil Temp = 40°C Viscosity = 40 cStRated FlowMax SettingCartridge MaterialBody Material150 litres/min (40 US GPM)350 bar (5000 psi)Working parts hardened and groundsteel. External steel surfaces black oxideStandard aluminium (up to 210 bar*)Add Suffix ‘377’ for steel optionMounting PositionUnrestrictedFLOW-US GPMCavity NumberA878 (See Section 17)0 10 2040030406000Torque Cartridgeinto Cavity60 Nm (44 lbs ft)15PRESSURE-BAR3503002502001501005003060 90 120FLOW LITRES/MIN150500040003000200010000PRESSURE-PSIWeightSeal Kit NumberRecommendedFiltration LevelOperating TempLeakageNominal ViscosityRange1.46 kg (3.21 lbs)SK1280 (Nitrile) SK1280V (Viton)BS5540/4 Class 18/13(25 micron nominal)-20°C to +90°C5 millilitres/min5 to 500 cSt*For applications above 210 bar please consult our technical department or use the steel body option.Integrated Hydraulics LtdIntegrated Hydraulics IncCollins Road, Heathcote Ind. Est., Warwick, CV34 6TF, UK.7047 Spinach Drive, Mentor, Ohio 44060, USATel: +44 (0) 1926 881171 Fax: +44 (0) 1926 315729 Tel: (440) 974 3171 Fax: (440) 974 3170Website: www.integratedhydraulics.comWebsite: www.integratedhydraulics.com15-111.A