2 - TCA spa

HYDRAULIC INTEGRATED CIRCUITS1T16 PRESSURE INTENSIFIERAPPLICATIONThis valve is used to convert low input pressure from asmall low pressure pump or sub-circuit to high pressureup to 700 bar (10000 psi) and can eliminate the need forhigh pressure pump, or high-low type circuit. It is bestsuited for use with low horsepower, variable volumepumps. Contact main office for full specifications.MAXIMUM PRESSUREInlet: 110 bar (1600 psi)Output: 700 bar (10000 psi)High pressure clampingcylinder.P.O check valve700 BAF (See4KD25Page 7-201RATED FLOWInlet: 1.5 litres/min (0.4 US GPM) maxOutput: 165 millilitres/min (10 in³/min)Directional Control Valve47.72 HOLES Ø7.0 THRO'50.831.89.547.716.050.8P33.394.019.0HP94.0226.0TINLETø67.0Where measurements are critical request certified drawingsORDERING CODE EXAMPLEBasic Code1T16 = IntensifierPort Sizes - Bodied Valves Only2W = 1/4” BSP1T162W6 SSealsS= Nitrile (For use with mostindustrial hydraulic oils)SV = Viton (For high temperature andmost special fluid applications)Pressure Intensification Ratio6 = 6.5:116Integrated Hydraulics LtdWe reserve the right to change specifications without noticeIntegrated Hydraulics IncCollins Road, Heathcote Ind. Est., Warwick, CV34 6TF, UK.7047 Spinach Drive, Mentor, Ohio 44060, USATel: +44 (0) 1926 881171 Fax: +44 (0) 1926 315729 Tel: (440) 974 3171 Fax: (440) 974 3170Website: www.integratedhydraulics.comWebsite: www.integratedhydraulics.com16-121.C