2 - TCA spa

1SH10 SHUTTLE VALVEBALL TYPEFOR SERVICEINSTRUCTIONS, PLEASECONTACT MAIN OFFICE.1SH10OUTLET (2)2INLET (1)INLET (3)31THIS COMPONENT IS NOT TESTED IFSUPPLIED AS CARTRIDGE INSERT ONLYAPPLICATIONThis valve provides a means of sensing the higherpressures between two lines on a hydraulic circuitallowing this line to be used for an auxiliary functionsuch as the removal of a mechanically applied brake,the operation of a gauge or to give a remote pressuresensing line for the control of a separate valve.OPERATIONWhen a higher pressure is sensed at inlet (1) than atinlet (3) the ball within the cartridge is forced against aseat opening the higher pressure to outlet (2). Whenthe higher pressure appears at inlet (3) the ball isforced against another seat which blocks inlet (1) andopens up inlet (3) to outlet (2).FEATURESCartridge design enabling speedy servicing whenmounted in a body or in a composite manifold.SPECIFICATIONSFigures based on: Oil Temp = 40°C Viscosity = 40 cStRated FlowMax WorkingPressureCartridge Material20 litres/min (5 US GPM)350 bar (5000 psi)All working parts hardened andground steel. External surfaces zincplated13Mounting PositionCavity NumberTorque Cartridgeinto CavityWeightRecommendedFiltration LevelOperating TempLeakageNominal ViscosityRangeUnrestrictedA169278-10 Nm (Use Loc-Tite 542)0.05 kg (0.11 lbs)BS5540/4 Class 18/13(25 micron nominal)-20°C to +90°C0.6 millilitres/min max5 to 500 cStIntegrated Hydraulics LtdIntegrated Hydraulics IncCollins Road, Heathcote Ind. Est., Warwick, CV34 6TF, UK.7047 Spinach Drive, Mentor, Ohio 44060, USATel: +44 (0) 1926 881171 Fax: +44 (0) 1926 315729 Tel: (440) 974 3171 Fax: (440) 974 3170Website: www.integratedhydraulics.comWebsite: www.integratedhydraulics.com13-105.B