2 - TCA spa

CARTRIDGE CAVITIESCAVITY A20530CAVITY TOOLSCAVITY A21145CAVITY TOOLSFORM DRILL AT2573FORM REAMER AT2574PLUG TAP M20 x 1.5 6H15°Ø41.00Ø 29.2829.16FORM DRILL AT2962FORM REAMER AT2963PLUG TAP 1 1/160.05 A 12 UN - 2B1.61-1/16-12UN-2B59.00 DRILLDEPTH57.00 REAMDEPTH44.0027.50FULL TH'D25.00MIN14.00A0.08LOCATINGFACE1.6 C1.000.20R 0.101.6M20x1.5-6H2.802.4030°1.645°30°45°1.6DRILLØ15.00Ø 16.0516.00Ø 17.5517.50Ø 25.0525.00Ø 21.9021.80Ø18.50R 0.10MAX1.61.6 1.61.64330° 2115°Ø8.00 MAXØ4.00 MAXØ4.00 MAX11.00-A-0.05 A0.05 A0.08 A25.5040.000.05 A54.0099.0077.9053.4028.75Ø12.70MAX TYP43211.625.02Ø 23.8223.7745°0.30R 0.201.660°30°30°30°1.61.645°Ø18.00 MAXØ19.500.500.30-A-3.673.300.08MIN FULL TH'DA1.6 C22.2035.4060.100.03 AMIN REAM84.6098.00100.001.6Ø 20.6720.620.05A1.6Ø 22.2722.220.05ACAVITY A21473CAVITY TOOLSCAVITY A21616CAVITY TOOLSFORM DRILL A3058FORM REAMER A3059PLUG TAP 1 1/1612UN-2BFORM DRILL AT3081FORM REAMER AT3082PLUG TAP 1 5/16”12UN-2B46.40REAM DEPTH0.08 A34.90MIN FULLTHREAD22.001-1/16-12-UN-2B1.6C3.673.3015°1.630 °45°1.61.6Ø41.25Ø 29.2829.16Ø25.0045°1Ø23.00Ø 23.8523.800.20R 0.102Ø22.20 MAX0.30Ø12.70 MAX-A-0.08 A0.08 A28.0048.00DRILL DEPTH47.00REAM DEPTH0.08 A1.50 34.30MIN FULL THREAD22.0015°1-5/16-12-UN-2B1.6 C3.673.301.620°1.645°1.6Ø 48.50Ø 35.6435.51Ø31.2545°1Ø27.50Ø 28.6528.600.20R 0.102Ø25.40 MAX0.30Ø19.10MAX-A-0.08 A0.08 A24.5049.00DRILL DEPTH17NOTE: These cavity dimensions are for installation purposes only. Certified drawings available upon request.Integrated Hydraulics LtdIntegrated Hydraulics IncCollins Road, Heathcote Ind. Est., Warwick, CV34 6TF, UK.7047 Spinach Drive, Mentor, Ohio 44060, USATel: +44 (0) 1926 881171 Fax: +44 (0) 1926 315729 Tel: (440) 974 3171 Fax: (440) 974 3170Website: www.integratedhydraulics.comWebsite: www.integratedhydraulics.com17-205.C