2 - TCA spa

PRESSURE DROPCOMPLETE VALVE3/8” PORTS1CEEC35 2: 5 :1 & 5: 1FLOW-US GPM0 2.5 5 7.5 105012.5750BASIC CODE: 1CEEC35 (INTERNALLY CROSS PILOTED)Sub-assembly part numbersBSP, steel3/8” BXP16247-3W-S-3774060015.019.09.0 MAX47.0 MAX20.051.5 42.0PRESSURE-BAR3020100PRESSURE DROP1CEEC951614FLOW-US GPM0 6.5 13FREE FLOWV-C19.5PILOT OPENC-V10 20 30 40 50FLOW-LITRES/MIN262402104503001500PRESSURE-PSI86.5V1V222.076.2101.69.0 MAX81.650.82 OVERCENTREVALVES1CE30F-*-*-*COMPLETE VALVE62.0 MAX31.0T86.577.0 CRS101.6C1C240.09.0 MAXBASIC CODE: 1CEEC95 (INTERNALLY CROSS PILOTED)Sub-assembly part numbersBSP, steel3/4” BXP16248-6W-S-377Tightening torque of “F” adjusterlocknut - 20 to 25 Nm3/4” PORTS10.0 APPROX2 HOLESØ9.0 THRO'10.0 APPROX6PRESSURE-BAR121086FREE FLOWV-C18015012090PRESSURE-PSI98.528.5V193.563.533.5TC110.053.5 CRS107.0 CRS127.0460V2C22025 50PILOTED OPENC-VFLOW-LITRES/MIN75100300101.6Tightening torque of “F” adjusterlocknut - 20 to 25 Nm2 OVERCENTREVALVES1CE90F-35-*-*Where measurements are critical request certified drawings48.594.0127.03 MOUNTINGHOLES Ø11.010.0 APPROXORDERING CODE EXAMPLEBasic Code1CEEC35 = Cartridge and Body1CEEC95 = Cartridge and BodyAdjustment MeansF = Screw AdjustmentN = Fixed - State pressure setting requiredFor fixed versions add setting in 10 bar increments to end ofpart number. Subject to a + -10% tolerance.1CEEC** F 3W 35 S 5Port Sizes - Bodied Valves Only3W = 3/8” BSP6W = 3/4” BSPPressure Range @ 4.8 l/min20 = (2.5:1 and 5:1): 70-210 bar. Std setting 100 bar. (1CEEC35)(10:1): 100-210 bar. Std setting 100 bar. (1CEEC35)35 = (2.5:1 and 5:1): 100-350 bar. Std setting 210 bar. (1CEEC35)(10:1): 120-350 bar. Std setting 210 bar. (1CEEC35)35 = (4:1 and 8:1): 200-350 bar Std setting 210 bar. (1CEEC95)Std setting made at 4.8 litres/minWe reserve the right to change specifications without notice377Body Material377= SteelPilot Ratio2 = 2.5:1 (1CEEC35)4 = 4:1 (1CEEC95)5 = 5:1 (1CEEC35 standard)8 = 8:1 (1CEEC95)10 = 10:1 (1CEEC35)Other ratios available uponrequestSealsS= Nitrile (For use with mostindustrial hydraulic oils)SV = Viton (For high temperatureand most special fluidapplications)6-302.G