Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesInformational messages (100-199)137119 - Realaudio read request timed outDescription: The proxy does not get a response when it talks to the RealAudio server. The connection remains alive, butmay fail. Reestablish the connection.120 - A service controller is already running on this machineDescription: This message indicates that a service controller is already running on the machine.120 - Access deniedDescription: The system does not permit access because there is no rule specified.120 - Added IP address to blacklist, timeout setDescription: IDS detects an intruder entering the security gateway and blacklists the IP address for a set time period.120 - Anonymous bind to LDAP server using null password is not allowedDescription: An anonymous bind to the LDAP server using a null password is not allowed.120 - Asked host about name and received responseDescription: The received response to a host/address lookup did not match the query. The parameter providesinformation on the query, the request, and the response. If the server that it is querying is under yourcontrol, you should check the DNS configuration for the host. If it is an external query, monitor the logs forany suspicious activity originating from this host. This is an attempt to obscure the source.120 - Bind with DN and supplied password failedDescription: The bind action has failed. The cause of this failure is available in the log message.120 - Cannot determine ESP typeDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.120 - Cannot determine tunnel typeDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.120 - Cannot find entrust configuration file, will use default configurationDescription: The default configuration file is used, as the authentication configuration file is not found.120 - Cannot find security policy for user or its primary group or its extended authenticationusergroup listDescription: The user attempts to connect and failed. This may occur because of a misconfiguration, or if the user isunauthorized to make the connection.