Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesError messages (400-499)241401 - Process terminating with signalDescription: The process has terminated abnormally.401 - Read from daemon failedDescription: Gwcontrol was unable to read a response from a security gateway service.401 - ReadFile failed with code WAIT_FAIL on the VPN driverDescription: The VPN driver is not responding, the security gateway is under attack.401 - Received non-ICMP packet from driverDescription: Pending removal. Programming error.401 - REDTAIL_FEATURES_SET failedDescription: Unable to inform the driver on the security gateway where the features are enabled.401 - Registry path too longDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.401 - Remote management login failedDescription: The administrator did not authenticate correctly with the SGMI or secure remote login (SRL).401 - RepeatedDescription: Messages that have occurred multiple times have been consolidated, indicating the possibility of anoccurrence of a more serious problem.401 - Restrict requires an addressDescription: You have to specify an address that is to be restricted.401 - Secure connect failedDescription: A secure remote login (SRL) client was unable to establish a connection to the security gateway’s SRLdaemon.401 - Send to NTP server failedDescription: An error occurred, while attempting to send data to the NTP server.401 - Should be 'authenticate yes|no'Description: The argument to authenticate should be “yes” or “no”.401 - Socket creation failedDescription: Unable to create a socket.