Symantec™ Security Gateways Reference Guide - Sawmill

206 Log messagesWarning messages (300-399)343 - Error parsing extension list, so restoring default: Scan All FilesDescription: This message indicates a problem with the antivirus scanning, but is able to continue.343 - Error reading from antivirus scan server socketDescription: Unable to read from the antivirus scan server socket. Check the communication between the securitygateway and the antivirus scan server.343 - Error receiving from the antivirus scan serverDescription: There is a communication problem between the HTTP daemon and the antivirus server. You may have torestart the server.343 - Error sending data to the antivirus scan serverDescription: Encountering problems while communicating with the antivirus server. You may have to restart the server.343 - Error shutting down outbound antivirus scan server socketDescription: Encountering problems terminating sessions on the antivirus server. You may have to restart the server.343 - Error while dialing or unable to connect to remote modemDescription: The notify daemon is unable to send a notification because the phone number used for the pager is invalid.343 - Exceeded maximum retries logging into the paging systemDescription: The notify daemon is unable to send paging notifications because the pager did not respond to severalretry attempts.343 - Exceeded maximum retries sending pageDescription: The notify daemon is unable to send fax notification because it has exceeded the limit for retries.343 - Failed to add dynamic filter for peer into local databaseDescription: This message indicates an out of memory situation.343 - Failed to add dynamic ISAKMP security association for peer into local databaseDescription: This message indicates an out of memory situation.343 - Failed to add dynamic protocol security association for peer into local databaseDescription: This message indicates an out of memory situation.343 - Failed to add ISAKMP security association for security policy into local databaseDescription: This message indicates an out of memory situation.