Symantec™ Security Gateways Reference Guide - Sawmill

160 Log messagesNotice messages (200-299)201 - Recipient validation failure on commandDescription: This is the case where a command like RCPT contains one or more illegal characters. The Loose sendercheck option should be enabled to avoid this failure.201 - RepeatedDescription: Messages that have occurred multiple times have been consolidated, indicating the possibility of anoccurrence of a more serious problem.201 - Resetting blacklist sequence numberDescription: While communicating with the blacklist daemon, notify daemon finds a mismatch sequence number, sothe specified IP is not blacklisted.201 - Step time server offset second(s)Description: This is an informational message informing how large the time slew is.201 - Timed out waiting for data connectionDescription: The FTP client or server did not send a timely response to the FTP proxy. The session is terminated.201 - Unable to create, bind, or listen to local socketDescription: The FTP daemon received a TCP error, and has terminated the session. If the problem persists, check theTCP configuration settings.201 - Unable to enter PASV modeDescription: The FTP daemon is configured only for the PASSIVE sessions. In this case, an active connection wasattempted.201 - Unable to forward commandDescription: The FTP daemon was unable to forward a command to the remote server.201 - Unable to get addressing information for data connectionDescription: The FTP daemon was unable to acquire the correct destination address of an internal server.201 - Unable to get reply from serverDescription: The FTP daemon did not receive a reply from the remote server.201 - Unable to open data connectionDescription: The FTP daemon was unable to open the data channel required to complete the FTP session.201 - Unexpected control connection terminationDescription: The FTP server has unexpectedly terminated the session with the FTP proxy.