Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesError messages (400-499)231401 - Blacklist ACK failed authenticationDescription: The Notify daemon received an invalid protocol while communicating with the blacklist daemon. If thiscondition persists, restart the blacklist daemon.401 - Blacklist packet invariant snafuDescription: The Notify daemon received an invalid protocol while communicating with the blacklist daemon. If thiscondition persists, restart the blacklist daemon.401 - Blacklist protocol not yet supportedDescription: The Notify daemon received an invalid protocol while communicating with the blacklist daemon. If thiscondition persists, restart the blacklist daemon.401 - Cannot access LCD deviceDescription: The LCD hardware is not functioning correctly.401 - Cannot add multicast address as it is not class DDescription: The address supplied is not a multicast address, and cannot be added.401 - Cannot add tunnelDescription: The driver was unable to add the tunnel to the tunnel database.401 - Cannot adjust the time of dayDescription: An attempt to adjust the time of day has failed.401 - Cannot adjust timeDescription: An attempt to adjust the time of day has failed.401 - Cannot allocate memory for blacklist packetDescription: The Notify daemon is unable to send the protocol to the blacklist daemon, which blacklists a host. Rebootthe system, if the problem persists.401 - Cannot allocate memory for connection blockDescription: This is a HTTP protocol error and it indicates a security gateway resource problem. The administrator canrectify this.401 - Cannot allocate memory for requestDescription: This is a HTTP protocol error, and it indicates a security gateway resource problem that the administratorcan rectify.401 - Cannot allocate space for incoming dataDescription: This is a HTTP protocol error, and it indicates a security gateway resource problem that the administratorcan rectify.