Symantec™ Security Gateways Reference Guide - Sawmill

236 Log messagesError messages (400-499)401 - Could not unlink fileDescription: The file could not be deleted because the file is probably in use. To resolve the problem, try closing anyrelated programs.401 - Daemon failed to restart selfDescription: A daemon has terminated without warning. It is supposed to restart itself, but has failed to do so.401 - Destination not providedDescription: A proxy or service was unable to determine the address of the destination.401 - Destination packet too short to contain dataDescription: Allocated output packet is too short.401 - Encrypted read failedDescription: A secure remote login (SRL) connection terminated because the encryption of the packet failed.401 - Entrust input buffer overflowDescription: The data for a signature verification was too big to fit into a buffer. The authentication will fail.401 - Entrust input overflowDescription: The data for a verification was too big to fit into a buffer. The authentication will fail.401 - Error building blacklist packetDescription: The Notify daemon encountered errors while building the packet that is to be sent to the blacklist daemon.This IP address is not blacklisted.401 - Error from blacklistDescription: The Notify daemon was unable to receive data from the blacklist daemon. The IP address is not sent.401 - Error sending blacklist packetDescription: The Notify daemon encountered errors while sending the packet to the blacklist daemon. This IP address isnot blacklisted.401 - Execution of daemon failedDescription: An attempt to run the security gateway process has failed.401 - Failed to allocate memory for preshared recordDescription: This indicates an out of memory condition.