Symantec™ Security Gateways Reference Guide - Sawmill

266 Log messagesCritical messages (600-699)616 - CPU temperature too highDescription: The temperature of the CPU unit is higher than the satisfactory level.616 - CPU temperature too lowDescription: The temperature of the CPU unit is lower than the satisfactory level.621 - Dropping connections because virtual memory is exhaustedDescription: The process is unable to obtain additional memory for establishing connections.621 - Failed connect to local security gatewayDescription: Tomcat servlets are dead. Reboot the box, ensure that local connection is possible.621 - Failed connect to remote security gatewayDescription: Ensure that all necessary nodes in the cluster are up and running.630 - Kernel memory purge will cause lost packetsDescription: (Microsoft Windows only) The driver tracks memory allocation within itself. The driver is not permitted toexceed Max_Memory usage. When memory allocation reaches Max_Memory, a memory purge is executedto free memory. The end-users may notice an error at this time.630 - The packet array size is too bigDescription: (Microsoft Windows only) The TCP/IP protocol is attempting to send more than 16 packets at the sametime. The request was rejected.632 - No cluster accountDescription: Unable to find a cluster account. You can try deleting the cluster, disabling HA/LB, and enabling it again tocreate the cluster account.650 - An aberrant counter incrementedDescription: Contact Technical Support by phone or online at http://www.symantec.com/techsupp/ to report the exacttext of this message. This message was not in the original released product, but may have been inserted asthe result of a hotfix.This message repeats every 10 minutes, if the condition still exists. The count is the number of times theincident occurs, is cumulative, and may be larger than the number of messages that appear in the log file.651 - Failed to retrieve configurationDescription: The process attempts to synchronize the configuration across the cluster but fails to retrieve theconfiguration.654 - No local active configurationDescription: In this state, no local active configuration exists. Rebuild the cluster, test the local connection.