Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesInformational messages (100-199)141120 - Failed to connect to serviceDescription: The component attempts to connect to a service, and it fails to connect.120 - Failed to create notify messageDescription: This is an operational error, which is identified using the error code.120 - Failed to establish IPSec security association with peerDescription: The Phase II negotiation has failed. This failure is caused because of a mismatch between the securitygateway configuration on both sides. Check the global IKE policy for configuration problems.120 - Failed to establish ISAKMP security association with peerDescription: The Phase II negotiation has failed. This is caused because of a configuration error but could also be causedby a software error.120 - Failed to extract authentication methodDescription: When you connect to the Symantec security gateway, you provide the IP address and the authenticationmethod for your security gateway. In this case, the authentication method could not be extracted.120 - Failed to extract hash algorithmDescription: Unable to extract the encrypted data, which is in hash algorithm format.120 - Failed to extract libauth mechanismDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.120 - Failed to extract number of peer proposalsDescription: The proposal in the negotiation is incorrect, so it cannot be extracted.120 - Failed to find suitable source addressDescription: A component fails to find a suitable source address for the given domain.120 - Failed to get a handle to authentication subsystem for authentication mechanismDescription: This is a configuration error. The server requires certain users to authenticate but these users are unable todo so, because they do not have access to the authentication server.120 - Failed to get user response to promptDescription: The user authorization process for a tunnel failed because of no user response.120 - Failed to get VPN message handleDescription: This message indicates a shortage of memory.