Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesError messages (400-499)239401 - Insufficient space for listing interfacesDescription: This is the case of an internal resource allocation issue.401 - Invalid blacklist message (cannot determine destination IP address)Description: The security gateway has detected a condition which would normally cause the source address to beblacklisted. In this case, the blacklist message, is itself, invalid, so source address is not blacklisted.401 - Invalid blacklist message (cannot determine destination port)Description: The security gateway has detected a condition which would normally cause the source address to beblacklisted. In this case, the blacklist message, is itself, invalid, so source address is not blacklisted.401 - Invalid blacklist message (cannot determine source or destination IP addresses)Description: The security gateway has detected a condition which would normally cause the source address to beblacklisted. In this case, the blacklist message, is itself, invalid, so source address is not blacklisted.401 - Kernel logging read failedDescription: The log service daemon is unable to receive log messages from the kernel. This message is evidence that anattack has been attempted.401 - MAC address and broadcast address lengths differDescription: This message indicates a severe Sun Solaris DLPI installation or network configuration error.401 - Missing argument to -f rule cache optionDescription: The HTTP daemon was unable to set its rule cache flush interval, which was passed into the program thatwas running.401 - Missing cookie informationDescription: A newly started NNTP process did not receive the connection information of its parent.401 - Missing session structureDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.401 - Multicast address using wildcard socketDescription: A multicast address cannot use a wildcard socket.401 - Net write failedDescription: The secure remote login (SRL) daemon was awaiting the challenge from the client, and received acommunication error. This session is terminated.401 - No address for fudge command, so line ignoredDescription: You have to specify an address for the fudge command.