Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesError messages (400-499)235401 - Command line broadcast delay value is unlikelyDescription: The value specified from the command line is not valid. To fix the problem, a different value should beused.401 - Command line broadcast delay value undecodableDescription: The value specified from the command-line is not valid. To fix the problem, a different value should beused.401 - Command line encryption delay value is unlikelyDescription: The value specified from the command-line is not valid. To fix the problem, a different value should beused.401 - Command line encryption delay value undecodableDescription: The value specified from the command-line is not valid. To fix the problem, a different value should beused.401 - Command line trusted key %s is unlikelyDescription: The value specified from the command-line is not valid. To fix the problem, a different value should beused.401 - Configuration error (Minpoll > maxpoll)Description: An inconsistency in the xntpd configuration file has been identified. To resolve the problem, the minpollvalue should not be set to be greater than the maxpoll value.401 - Could not connect to the SESA agentDescription: The notify daemon is unable to connect to the SESA agent, so the log messages are not sent to SESA. Checkthe connections to the SESA Manager.401 - Could not create proxyDescription: (Microsoft Windows only) Eaglesvc was unable to start proxies.401 - Could not list user accountsDescription: (Microsoft Windows only) The vulture daemon is unable to list the user accounts, which causes some illegaluser accounts to exist that cannot be cleaned.401 - Could not resolve nameDescription: The supplied name could not be resolved. Use the dotted octet instead.401 - Could not stop serviceDescription: Vulture daemon attempts to stop a service but fails. Check the parameters to identify the cause.