Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesWarning messages (300-399)217343 - Packet for interface was routed to interfaceDescription: The packet was dropped. There was an attempt to send a packet out of the wrong interface. By default, thismessage is sometimes suppressed because the global/LogLevel default is less than two. This check can alsobe disabled entirely. You should only do this for an unusual network configuration. The global drivervariable controlling this message is Dont_Check_Same_Interface.343 - Packet from proxy dropped while trying to enter tunnel Description: A transmit packet was matched to an outgoing tunnel, and the packet was not subject to proxy processing,and the source address of the packet was not on the security gateway, so the packet was dropped.343 - Page recipient name too longDescription: The pager recipient’s name is too long, so the pager notification could not be sent.343 - Paging system forced disconnectDescription: The notify daemon is unable to send paging notifications because of paging protocol problems.343 - Parsing extension. Restoring default: Scan All FilesDescription: This message indicates a problem with the antivirus scanning but the process continues to function.343 - Please examine your certificate configuration file and restart the security gatewayDescription: Isakmpd (the VPN server) could not log into the security gateway. Check the entrust.cf file in theconfiguration directory, to determine the cause of the problem.343 - Process vanishedDescription: A proxy, management daemon or security gateway service, which should be running are no longer running.343 - Proposed security association lifetime exceeds the cert notValidAfterDescription: This is a configuration error. When authenticating using the Certificate method, it is found that the tunnelhas a lifetime which exceeds the lifetime of the Certificate.343 - Read operation timed outDescription: The secure remote login (SRL) session timed out because of a communications problem. Check theconnectivity with the security gateway.343 - Received peer CPI of zero, defaulting to using well-known CPIDescription: This is a warning that appears when you use the compression algorithm for authentication. This is part ofthe normal procedure.343 - 'recurse_for' directive found in private hosts fileDescription: The “recurse_for” directive is found in the private hosts file.