Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesWarning messages (300-399)221343 - The interface has multicast enabled, but no server transparency for the subnet broadcastaddress. This means that subnet broadcasts will not be delivered. Suppress this message withvpn.log_missing_multicast_address=FALSEDescription: The error information and the corrective action is available in the message.343 - The LDAP server cannot be contactedDescription: The security gateway was unable to contact the LDAP server, identified in the resource field of the message.343 - The LDAP server cannot be resolved as a hostnameDescription: The LDAP server could not be located.343 - The NAT entry mapping could not be preserved and was deletedDescription: The new NAT pool definitions disallow an existing NAT entry.343 - The node secret file has not been downloaded from the ACE serverDescription: This warning can occur when the security gateway is not a client of the RSA SecurID server (check the RSASecurID server logs), the “sent node secret” checkbox is set on the RSA SecurID server, or the user hasentered an incorrect user name/PIN/tokencode combination.343 - The static username and password check took secondsDescription: The status of the check conducted is available in the parameters.343 - The target range includes the interface address. This range will not be loadedDescription: The range of addresses specified in the configuration setting is invalid.343 - The target range includes the interface address. This range will not be loaded as a proxy ARPrangeDescription: The range of addresses specified in the configuration setting is invalid.343 - The user authenticated successfully when given a dummy password prompt. Access hasbeen deniedDescription: The user is defined on the security gateway, but is not configured to use any of the authentication methodsin this sequence.343 - The user authenticated with an invalid domain nameDescription: A client, using Microsoft Windows, attempts to authenticate through a Microsoft Windows domain but thedomain name used is invalid.343 - Timed out waiting for response from paging systemDescription: The paging system did not respond in a timely manner. This notification will not be sent.343 - Timed out waiting for response from TACACS+ daemonDescription: The session is timed out while waiting for a response from the TACACS+ daemon.