Symantec™ Security Gateways Reference Guide - Sawmill

246 Log messagesError messages (400-499)402 - Unable to get host nameDescription: The SDI library is unable to get the host name of the interface most immediate to the RSA SecurID server.403 - Cannot read configuration fileDescription: Gwcontrol could not open its configuration file for reading. This message comes from many placesincluding bullfrog, isakmpd, VPN, and filter utilities. Each attempt to open a configuration file failed. Thename of the file it was looking for should be in the filename parameter.404 - Error in configuration file (action not specified)Description: There is an error in the configuration file. The component was unable to process a line in the configurationfile. The parameters provide more detail on this error.404 - Error in configuration file (ARP mask not specified)Description: Error loading the ARP configuration information.404 - Error in configuration file (bad ARP address)Description: Error loading the ARP configuration information.404 - Error in configuration file (cannot parse as an interface)Description: The configuration settings for the interfaces are incorrect.404 - Error in configuration file (invalid address mapping information)Description: The configuration settings for the interfaces are incorrect.404 - Error in configuration file (invalid interface address information)Description: The configuration settings for the interfaces are incorrect, it has an invalid interface address information.404 - Error in configuration file (invalid range for nbdgramd.low_unnumbered_port -nbdgramd.high_unnumbered_port, so using default rangeDescription: Check the configuration for port changes.404 - Error in configuration file (line missing or invalid)Description: Notification configurations are corrupted. Reconfigure your notifications. If it comes from the HTTPdaemon, the named configuration file is corrupt.404 - Error in configuration file. Invalid range for udp-gsp.low_unnumbered_port -udp_gsp.high_unnumbered_port, so will use default rangeDescription: An error has occurred in the configuration file. Check the configuration file for port ranges.404 - Inconsistent user countsDescription: The security gateway is unable to find a valid license because the user counts of the security gatewayfeatures do not match.