Symantec™ Security Gateways Reference Guide - Sawmill

208 Log messagesWarning messages (300-399)343 - Failed to decrypt saved configuration fileDescription: When you restore a configuration, the resulting file is encrypted. In this case, the restore process hasfailed.343 - Failed to get dataDescription: The secure remote login (SRL) daemon was unable to get the data because of communication errors.343 - Failed to initialize key contextDescription: The security gateway is unable to encrypt data going to the remote logging utility. No data is sent.343 - Failed to load the MAPI DLLDescription: The notify daemon is unable to send mail notification because it was unable to load Windows.dll.343 - Failed to login into the ISAKMP engineDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.343 - Failed to open control socketDescription: The proxy was unable to connect to the antivirus scan server. The antivirus scan server is either notoperational or is not listening at the address and/or port that the proxy was configured to use.343 - Failed to open directoryDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.343 - Failed to open fileDescription: The service was unable to open the IDS XML files. Ensure that these are available in the appropriatedirectory:/var/lib/sg/lang/xx (UNIX)\usr\raptor\sg\lang\xx (Microsoft Windows)343 - Failed to open rating fileDescription: The ratings file could not be located.343 - Failed to receive dataDescription: Remote access was attempted, but during the challenge/response, there was a communication error.343 - Failed to receive response from RADIUS server when trying to authenticate. The server maybe downDescription: This indicates a communication problem with the RADIUS server. The server is down.