12.07.2015 Views

Symantec™ Security Gateways Reference Guide - Sawmill

Symantec™ Security Gateways Reference Guide - Sawmill

Symantec™ Security Gateways Reference Guide - Sawmill

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

146 Log messagesInformational messages (100-199)120 - Non-matching or unsupported Diffie-Hellman groupDescription: Diffie-Hellman is the standard IKE method for establishing shared keys. Group 1 and Group 2 are theDiffie-Hellman group numbers for establishing these IKE session keys. In this case, the group entered isinvalid.120 - Not able to determine the authentication typeDescription: This message indicates an internal software error. Please contact Technical Support by phone or online athttp://www.symantec.com/techsupp/ to report this.120 - Not aggressive mode, cannot extract Phase 1 IDDescription: There is an error in the Phase I negotiation.120 - Not enough memory to perform distinguished name conversionDescription: This is caused by an incorrect or corrupted configuration file.120 - Not sending ICMP unreachable in response to non-informational ICMP ()received on interface Description: An ICMP message was received indicating an error condition. The security gateway did not respond to thiserror.120 - Not waiting for Symantec Client VPNDescription: This message appears when you start the Symantec Client VPN.120 - Notified, removing stale tunnels to/from security gatewayDescription: Received notification to remove the old tunnels to and from the security gateway, and therefore, removingthese tunnels.120 - Notify payload from peer incorrectly formattedDescription: The notify message from peer is incorrectly formatted.120 - NS garbage collector deleted NS entries, entries remainingDescription: If dnsd.report_cleanup is set to 1, the DNS proxy reports when it cleans up old cached information.120 - Packet receivedDescription: The option “log all receive packets” was enabled, for either test or diagnostic purposes, so every packetthat is not blacklisted is logged. The performance is adversely affected.120 - Packet transmittedDescription: The option “log all transmit packets” was enabled, for either test or diagnostic purposes, so every packetnot blacklisted is logged. The performance is adversely affected.

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!