Symantec™ Security Gateways Reference Guide - Sawmill

180 Log messagesWarning messages (300-399)301 - Chmod failedDescription: Fetcher was unable to set file permissions on the http.rating file.301 - Configuration error at lineDescription: There exists a configuration error, at the line, indicated in the error message. Check the particular line.301 - Connection will be denied because there were some rules, but no best rule foundDescription: The connection is denied because no valid rule was found. The administrator should check and determineif the rules that are set up for the connection are valid.301 - Copy could not read from file (maybe locked by another process)Description: While trying to access the http.rating file, the daemon encountered read access problems. The new ratingsfile is not used.301 - Copy failed because no memory for hash tableDescription: The HTTP daemon was attempting to copy the new ratings file and encountered errors. The new ratingsfile is used.301 - Corrupt file found, so will rebuildDescription: The Ratings file used by HTTP, SMTP, and FTP are corrupt.301 - Could not access TCP/IP parametersDescription: (Microsoft Windows only) This message provides information on the status of the network check.301 - Could not listen on port(s)Description: A port conflict was detected between the HTTP daemon and another service running on the securitygateway. Valid ports are in the resource parameter.301 - Could not send to clientDescription: A communication error was encountered while the HTTP daemon was communicating with the client.301 - Could not set destination to proxy specified in ruleDescription: The HTTP server is unable to communicate with the proxy.301 - Could not set IP routingDescription: (Microsoft Windows only) This message provides information on the status of the network check.301 - Could not stop bcast forwardingDescription: (Microsoft Windows only) This message provides information on the status of the network check.