Symantec™ Security Gateways Reference Guide - Sawmill

Log messagesInformational messages (100-199)147120 - Performing ISAKMP peer recovery on tunnelDescription: This is a normal feature. When you restart the security gateway, this message appears, indicating that allthe old tunnels are retrieved.120 - Process was automatically restartedDescription: The bullfrog daemon (HA/LB) received a command to restart itself.120 - ProcessorDescription: The “count” indicates the number of physical processors on the system. If Hyper Threading is turned on,the “count” indicates the number of logical processors.120 - Protocol disabled for user from hostDescription: Various proxies have been set up for Out of Band Authentication (OOBA). This message provides the statusof the OOBA session.120 - Protocol enabled for user from hostDescription: Various proxies have been set up for Out of Band Authentication (OOBA). This message provides the statusof the OOBA session.120 - QueryDescription: A query to made to gwcontrol, requesting connection information, authentication information, orconfiguration information.120 - Query read errorDescription: A query to gwcontrol, for information, has failed.120 - Query response too longDescription: A gwcontrol query, receives a response that is long.120 - Queue full, dropping new packetDescription: The new packets are dropped as a large number of packets arrive. This is a software protection feature.120 - Ratings file is up to dateDescription: The HTTP daemon ratings file has been updated with the most current version.120 - Reached maximum capacity, cannot open session with peerDescription: You can only have a particular number of IKE negotiations, at a given time, because of resource limitation.This message indicates that this limit has been reached.120 - Read select failed on ISAKMP socketsDescription: This message appears when you connect to a remote machine that is not alive, or does not have therequested service running.